|
|
 |
500.V3
Stanton
The 500.V3 is an updated version of the classic Stanton 500AL. With more years spent on the decks than any other cartridge in the world, the 500 series has earned a reputation as a standard. The 500.V3 represents a perfect balance between economy, reliability, ruggedness and optimum performance. Available in the following versions: SingleA single cartridge inside a blister pack. Twin PackTwo cartridges inside a blister pack. Perfect for: Hip-Hop / Scratch and Club DJs Consumers Record shops Beginner DJs
click here for more information... |
|
|
500.V3 Twin Pack
Stanton
The 500.V3 is an updated version of the classic Stanton 500AL. With more years spent on the decks than any other cartridge in the world, the 500 series has earned a reputation as a standard. The 500.V3 represents a perfect balance between economy, reliability, ruggedness and optimum performance. Available in the following versions: SingleA single cartridge inside a blister pack. Twin PackTwo cartridges inside a blister pack. Perfect for: Hip-Hop / Scratch and Club DJs Consumers Record shops Beginner DJs
click here for more information... |
|
 |
505.V3
Stanton
The new 505.V3 is the best budget-priced scratching cartridge available today. The super sturdy stylus has been coupled with the most pumped-up output for the deepest bottom and in-your-face sound. Available in the following versions: SingleA single cartridge inside a blister pack. Twin PackTwo cartridges inside a blister pack. Twin Pack H4S Two cartridges conveniently pre-mounted on Stanton H4S silver headshells. Perfect for: Hip-hop / Scratch DJs Consumers Record shops Beginner DJs
click here for more information... |
|
|
505.V3 H4 - Twin pack on Headshells
Stanton
The new 505.V3 is the best budget-priced scratching cartridge available today. The super sturdy stylus has been coupled with the most pumped-up output for the deepest bottom and in-your-face sound. Available in the following versions: SingleA single cartridge inside a blister pack. Twin PackTwo cartridges inside a blister pack. Twin Pack H4S Two cartridges conveniently pre-mounted on Stanton H4S silver headshells. Perfect for: Hip-hop / Scratch DJs Consumers Record shops Beginner DJs
click here for more information... |
|
|
505.V3 Twin Pack
Stanton
The new 505.V3 is the best budget-priced scratching cartridge available today. The super sturdy stylus has been coupled with the most pumped-up output for the deepest bottom and in-your-face sound. Available in the following versions: SingleA single cartridge inside a blister pack. Twin PackTwo cartridges inside a blister pack. Twin Pack H4S Two cartridges conveniently pre-mounted on Stanton H4S silver headshells. Perfect for: Hip-hop / Scratch DJs Consumers Record shops Beginner DJs
click here for more information... |
|
 |
520.V3
Stanton
Designed with the most demanding cueing in mind, the 520.V3 offers the tightest suspension in the 500 family of products. The results: this cartridge can take the most demanding loads and deliver on point tracking during backspinning and scratching. Available in the following versions: SingleA single cartridge inside a blister pack. Twin PackTwo cartridges inside a blister pack. Twin Pack H4S Two cartridges conveniently pre-mounted on Stanton H4S silver headshells. Perfect for: Hip-hop / Scratch DJs
click here for more information... |
|
|
520.V3 H4 - Twin pack on Headshells
Stanton
Designed with the most demanding cueing in mind, the 520.V3 offers the tightest suspension in the 500 family of products. The results: this cartridge can take the most demanding loads and deliver on point tracking during backspinning and scratching. Available in the following versions: SingleA single cartridge inside a blister pack. Twin PackTwo cartridges inside a blister pack. Twin Pack H4S Two cartridges conveniently pre-mounted on Stanton H4S silver headshells. Perfect for: Hip-hop / Scratch DJs
click here for more information... |
|
|
520.V3 Twin Pack
Stanton
Designed with the most demanding cueing in mind, the 520.V3 offers the tightest suspension in the 500 family of products. The results: this cartridge can take the most demanding loads and deliver on point tracking during backspinning and scratching. Available in the following versions: SingleA single cartridge inside a blister pack. Twin PackTwo cartridges inside a blister pack. Twin Pack H4S Two cartridges conveniently pre-mounted on Stanton H4S silver headshells. Perfect for: Hip-hop / Scratch DJs
click here for more information... |
|
 |
680.V3
Stanton
The legendary 680.V3 cartridge is regarded as one of the best cartridges on the planet for mixing, club use, and scratching. The wide-band frequency response will give you high energy record playback and that extra punch you need to quake the dance floor whether playing dance or hip-hop. The 680.V3's suspension is designed to be very stable for those less then perfect club setups. The suspension is so robust that the 680.V3 functions just as good as a scratch needle as it does as a club needle. Available in the following versions: SingleA single cartridge inside a plastic carry case. MP4The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case". Perfect for: Hip-hop / Scratch DJs Club DJs
click here for more information... |
|
|
680.V3 MP4 (Matched Pair)
Stanton
The legendary 680.V3 cartridge is regarded as one of the best cartridges on the planet for mixing, club use, and scratching. The wide-band frequency response will give you high energy record playback and that extra punch you need to quake the dance floor whether playing dance or hip-hop. The 680.V3's suspension is designed to be very stable for those less then perfect club setups. The suspension is so robust that the 680.V3 functions just as good as a scratch needle as it does as a club needle. Available in the following versions: SingleA single cartridge inside a plastic carry case. MP4The MP4 package includes 2 matched cartridges, mounted on tone-arm like devices, inside a small and practical road-worthy clear "flight-case". Perfect for: Hip-hop / Scratch DJs Club DJs
click here for more information... |
|
 |
680E.V3
Stanton
The 680.V3 is the latest generation of Stanton's popular 4 coil standard mount stereo cartridge line for club DJs. It boasters the renown Stanton ruggedness balanced with total musical responsiveness. The elliptical stylus is guaranteed to extract the subtle details in your vinyl, while the 4-coil moving iron pickup translates it into clean and accurate output. Available in the following version: SingleA single cartridge inside a plastic carry case. Perfect for: Club DJs Producers / Remixers Record Archives
click here for more information... |
|
 |
Akai 24 Track Digital Recorder
Akai
Akai 24 Track Digital Recorder At last, a pro-quality 24-track linear digital recording solution in a single compact package. Designed to work the way you do, the DPS24 combines the ease-of-use of a fully-automated console with the power and flexibility of disk-based digital recording, to give you the same engineering options and sonic results as systems costing tens of thousands more.
click here for more information... |
|
 |
Akai E2 Headrush Delay and Phrase Sampler Pedal
Akai
Akai E2 Headrush Delay and Phrase Sampler Pedal Following on from where the award-winning E1 left off, the new E2 Headrush delay pedal brings delay, tape echo simulations and a looping recorder in one convenient pedal. User selectable delay options allow for maximum control of signal output and include several real-time timing and level adjustment selections as well as feedback level for repeats. Headrush can also simulate a 4-head analog tape echo machine and it is possible to set the spacing between these "virtual: heads to create complex multiple delays and repeats. You can also set the decay characteristics of these heads. Furthermore, the outputs of each of these virtual heads appear on individual outputs for ultimate flexibility when used with an external mixing console. The Looping Recorder mode allows you to record and overdub layer after layer of sound in real-time making the Headrush an unbelievable live performance tool. Depending upon which mode is selected, the left footswitch controls the on/off and play/stop functions while the right footswitch sets the tap delay time or recording and overdub options. The LED display indicates which effect in use and blinks in time showing the delay time selected. Features: 16-bit Digital Delay - Delay time from 0.5ms to an astonishing 35 seconds maximum (*) Tape Echo mode with four individual outputs for each head Looping Recorder with overdub mode - Powerful tool for solo performances Head Gap adjusts the delay time between the heads HF Damp simulates an analog delay sound Feedback sets the feedback level for repeat times Ratio allows adjustment of wet and dry mix Real-time delay control - sets delay time by tapping footswitch twice (*) Depending on the selected mode
click here for more information... |
|
 |
Akai EWI4000S
Akai
Akai EWI4000S Description The Akai Professional EWI4000S is a newly designed electronic wind controller. This musical tool incorporates several improvements in the development of MIDI/ Synth instrument capabilities. The EWI4000S has many of the long sought after controls and functions that are necessary for expressive performance. These benefits have been proven by its predecessors, but the EWI offers these features at a much lower price. There are several improvements to the design as well, such as having a built-in sound module, direct MIDI IN and Out, and other updated operating functions. These functions make playing the EWI4000 easier than any other electronic wind instrument. With the sound module and the instrument all in one product, players no longer need to be tethered to a module. By using MIDI and audio wireless transceivers, EWI4000S players can move freely on the stage as they are playing. The user can easily switch between programs on the EWI4000S directly with a dedicated Program selection button, or use the note keys to select stored patches. The internal sounds of the EWI4000S are based on a virtual analog synth sound module that is very responsive to the player's nuance. With easily accessible controls for breath, vibrato, glide time, and bend width, users can adjust the settings of the EWI4000 to their specific playing style. Also you can send multiple MIDI messages via breath control to send expression and aftertouch control messages. The EWI4000S also offers some new performance control features as well, such as the Octave Key. When you activate the Octave mode, you will get an automatic doubling of notes at one octave below the note you are playing. There is also a Hold Mode, which holds a note that you select enabling you to solo around that note. This is the first EWI with a sostenuto capability! Besides being a great wind controller, you also get a first rate synthesizer. The EWI4000S has new synthesis features which were not available on previous EWI's. The internal analog modeling synth has two voltage controlled oscillators (sawtooth, triangle, square with pulse width waveforms) with individual volume control. The voltage controlled filter has a feature which allows you to change from 2 to 4 pole filters. The EWI4000S's new noise generator and a dedicated VCF add more realism to your playing, emulating breath noise. The EWI4000S has a new sweep function, which works more effectively than a typical envelope generator. As you change the force of your playing the sweep parameter will alter the shape of the sound. The synth contained inside has a LFO (low frequency oscillator) specifically for the voltage controller filter modulation. This LFO affects vibrato as you use the bite sensor. The EWI4000 also has built-in effects, a first for Akai EWI products, such as Reverb, Chorus and Delay to thicken or double-up your solos. Since it would difficult to put all the knobs and buttons on the EWI-4000 that are needed to adjust
click here for more information... |
|
 |
Akai EXM128 128MB Expansion RAM for MPC1000
Akai
Akai EXM128 128MB Expansion RAM for MPC1000 Supercharge your MPC1000. The Akai EXM128 adds 128MB RAM to your MPC1000, adding to the number and/or size of the samples you can run simultaneously. Make the most out of your MPC, increase the size of your musical canvas with Akai's EXM128.
click here for more information... |
|
 |
Akai KCF1 Keyboard Chord Finder
Akai
Akai KCF1 Keyboard Chord Finder Instant access to over 2,000 chords and variations -- in the palm of your hand! The KCF1 features a large LCD display, a Find feature, and more. It's a great way to learn new chords and quickly find chord names from any position on the keyboard.
click here for more information... |
|
 |
Akai MP9 Optional Power Supply for MPD16
Akai
Akai MP9 Optional Power Supply for MPD16 Use this handy power supply when USB isn't an option.
click here for more information... |
|
| |
 |
Akai MPC1000
Akai
Features Friendly, familiar MPC interface Portable, perfect size for air travel "carry on" Large graphic LCD Legendary "MPC" style velocity and pressure sensitive pads Two stereo, 4 assignable outputs, and digital I/O standard Up to 128MB of RAM USB Mass Storage Class compatible Realtime control using Q-Link sliders
click here for more information... |
|
 |
Akai MPC2500
Akai
Akai MPC2500 Description The Akai Professional MPC2500 Music Production Center combines a 64-Track MIDI Sequencer with a 32-voice 16bit Stereo Digital Sampler. The MPC is a rock solid sequencing and drum programming machine with 16 velocity and pressure sensitive rubber pads. The unit allows you to sample more efficiently. This composition center is contained in one extremely powerful desktop unit. Designed for professional audio production, the MPC2500's intuitive and ergonomic interface makes it the ultimate user friendly composition studio. Two internal effects processors can be used simultaneously. This includes a wide range of effects algorithms, such as reverb, delay, bit grunger, chorus, phasers, flying pan, 4-band EQ, compressor, and a phase shifter. Real-time control is provided by two note variation sliders and two Q-Link knobs. Q-link knobs can be separately assigned to allow flexible, real-time performance control of a wide variety of selectable parameters. These parameters include level, pan, filter cut-off and resonance, and tuning. Each assignable Q-Link knob can generate MIDI data so that parameter information can be recorded and played back from within a sequence. Following the highly acclaimed MPC60 and MPC3000, 2 MIDI inputs and 4 MIDI outputs come standard enabling 64 external MIDI channel operation. In addition, the MPC2500 can individually control its onboard sampler up to 64 Parts, allowing users to assign a different program on each track. A large LCD screen allows a clear view of sequence data displaying features such as a drum machine 'grid'. Continuous MIDI data can be shown as well as edited graphically. The MPC2500 comes with 16MB of onboard memory which can be expanded up to 128 MB of RAM via the optional EXM128 memory card. The MPC2500 has the capability of an optional internal Hard Disk and CD-RW drives.
click here for more information... |
|
 |
Akai MPC4000
Akai
Akai MPC4000 Features Z-96 sampling engine High-performance Intel CPU 24-bit audio resolution up to 96kHz sampling rate 64 voices, or 32 voices at 96kHz 272MB onboard memory, expandable to 512MB Memory meters display remaining free sampler memory, sequence memory, and CPU memory IntelliSample automates sampling, naming, program creation, and sample assignment Tons of onboard sounds 6 pad banks provide quick access to up to 96 different sounds Virtual sampling streams sample playback directly from hard disk Compatible with Z-Series and S-Series Multi, Program, and Sample files 4-channel, 56-bit effects processor Graphical sequence event editing USB slave port provides support for ak.Sys network and control system software
click here for more information... |
|
 |
Akai MPC500 With Free EXM128 Expansion Card
Akai
Akai MPC500 With Free EXM128 Expansion Card GET A FREE EXM128 EXPANSION CARD ! A $299 Value! Akai MPC500 Description Akai Professional, the industry standard in modern music production, proudly introduces the MPC500. As the newest addition to the music production center (MPC) family, the battery-powered MPC500 now gives everyone the ability to take this popular compositional tool anywhere they go. Portable and battery-powered, the MPC500 is further evidence of Akai's market leadership in giving professional musicians and producers products that meet the needs of their increasingly mobile lifestyles. Its unmatched functionality offers drum programming, sequencing and sampling capabilities that allow artists the luxury of creating music on the go in a compact road worthy chassis. The MPC500 is data compatible with both the MPC1000 and the MPC2500 and includes both line and mic inputs for sampling your own sounds. Other enhancements include a mass storage-class USB port, which makes it easier than ever to store a massive amount of sample and sequencer data. With the addition of the built-in compact flash drive, musicians and producers will have greater access than ever to all sounds and sequencer data. Akai MPC500 Portable Music Production Center Features: Classic MPC feel in a portable, battery powered unit 12 MPC style pads Built in effects Data compatible with MPC1000 and MPC2500 CF card for quick, expandable data storage Uses same EXM128 memory expansion as MPC1000 and MPC2500 USB for transferring samples and sequences to and from a computer Selectable mic/line inputs Q-Link slider for writing tune, filter or level automation Pattern-based and linear 48-track sequencer 16 MIDI channels 16-bit/44.1kHz sampling 32-voice drum/phrase sampler with up to 128MB RAM Battery powered (6 AAs) or AC powered Velocity and pressure sensitive pads for expressive programming 12 Levels function: one sound on all pads with varied level or tuning per pad Built-in Compact Flash drive and USB port (Mass Storage Class) Support for standard WAV files and MIDI sequences Built-in Analog Audio I/O, headphone output, and MIDI I/O Internal sounds in Flash 4-way sample layering and velocity switching per pad 1 lowpass filter with resonance per voice On-board effects: 2 stereo effects and a Master effect Memory expansion available separately Compact Flash card and AC power adapter included Akai MPC500 Portable Music Production Center Specifications: General Display: 2 x 16 character LCD w/back light Memory card slot:Compact Flash (The size of the compact flash card that MPC500 can handle is from 32MB to 2GB) Dimensions: 266mm x 175mm x 44mm Weight: 1.34 kg Power requirement: 12v DC 600mA (negative tip) Battery life: Approximately 4.5 hours of continuous use with LCD backlight ON Akai MPC500 Sound Generator Sampling rate: 44.1kHz Memory capacity: 16MB standard (11.5MB for sound memory), expandable to 128MB Recording time: 136sec. (16MB, MONO) or 24m28sec. (128MB,
click here for more information... |
|
 |
Akai MPD16 USB MIDI Pad Control Surface
Akai
Akai MPD16 USB MIDI Pad Control Surface Expanding on the legacy of the legendary MPC series, Akai Professional introduces the MPD16 USB/MIDI Pad Control Surface. The MPD16 is a self-contained unit that connects via USB and/or MIDI to computers and sound engines such as the new Akai Z4 and Z8 samplers, which include drum program set-ups as well as the standard keyboard-assigned programming. The functionality of the MPD16 is designed with simplicity in mind. The days of programming drum sequences via a keyboard are gone forever. 16 MPC-spec pressure-and-velocity sensitive drum pads generate Note-On velocity when tapped. In Full-Level mode, the MPD16 produces data with velocity value of 127, regardless of the velocity of the pad tapped and in 16-Level mode it allows you to generate the note velocity in 16 steps with 16 pads. The active pad (note number) is the last pad played just before the 16-Level key was pressed. The Bank key switches between banks 1 and 2 allowing access to 2 separate banks of sounds. The Active key enables the fader which outputs MIDI control changes. The various parameter settings, such as MIDI Note Assign, MIDI Channel, MIDI Control Change, etc. can be assigned from the computer via USB. MPD16 set-up is facilitated with the MPD16 Utility and PC/MAC driver software CDROM. The MPD16 can be powered via computer USB or the optional AC adapter.
click here for more information... |
|
 |
Alesis 16 Bit Stereo Drum Machine
Alesis
Alesis 16 Bit Stereo Drum Machine The SR-16 is a fully functional drum machine at a very affordable price. Features: Tonal impact changes drum sounds 50 preset rhythm patterns programmed by a studio drummer helps you get started quickly 16-voice polyphony 12,000-note capacity 100 songs and 400 patterns MIDI clock and song pointer functions are provided to assist you in making your patterns work 233 drum and rhythm samples with variations of reverbs and rooms Size: 9.25" x 6.5" x 1.5"
click here for more information... |
|
 |
Alesis 24 Track Hard Disc Recorder
Alesis
ALESIS HD24: 24-Track Hard Disk Recorder With Dual Removable Hard Disks The ADAT HD24 24-track hard disk recorder features ADAT's legendary ease of use, quality and affordability. The HD24 comes complete with 24 channels of ADAT optical digital In/Out and ADAT 9-pin sync to fit easily into existing ADAT systems. With 24 channels of analog and digital Input/Output connectors included, the HD24 adapts to virtually any mixing or recording setup. Features: 24-track, 24-bit digital audio recording 44.1kHz and 48 kHz internal sample rates 90 continuous minutes of high-resolution 24-track recording on standard, low-cost 20-gig IDE computer disks (one drive included) Removable hard disks include a shock-protective case for travel or storage hot-swappable media bays to instantly reload hard disks and quickly back up data 24 analog inputs and outputs (+4dBu, 1/4" TRS) 24 channels of ADAT Optical I/O MIDI I/O, MTC I/O, Ethernet connection, ADAT Sync I/O Internal editing capabilities including cut, copy, and paste Editing can be done via the front panel, by remote or with PC-based DAW (Digital Audio Workstations) via the ethernet port Exported tracks can be emailed for further editing or recording All necessary hardware and connectors included Includes Alesis LRC (Little Remote Control) Size: 19"w x 13.5"d x 5.2"h. Wt. 20 lbs.
click here for more information... |
|
|
