 |
MXR M-132 Super Comp Compressor Pedal
MXR
The MXR M-132 M-132 Super Comp Compressor Pedal is an improved version of the legendary Dyna Comp. This is the guitar effects pedal that's the ultimate source for the "Nashville sound." Attack level control preserves initial volume without sacrificing sweet sustain. Sensitivity control lets you dial in just the right amount of compression. The Super Comp effects pedal has a super-tough housing with bypass footswitch and LED.
click here for more information... |
|
 |
MXR M-133 Micro Amp Pedal
MXR
The MXR M-133 Micro Amplifier Pedal adds a preset amount of gain, using a single control. With a guitar, this lets you boost your signal for lead work, adjust between 2 different guitars with unmatched output (i.e., humbucker to single coils), or it can supply a permanent boost in a long effects chain where signal drop-off is a problem. Power: Single 9-volt battery or Dunlop ECB-003 AC Adapter - Controls: Footswitch toggles amp on/bypass (red LED indicates on) Gain knob adjusts total output volume when the Micro Amp is engaged.
click here for more information... |
|
 |
MXR M-134 Stereo Chorus Pedal
MXR
The gorgeous-sounding MXR M-134 Stereo Chorus Pedal will remind you how cool chorus can be. Want to add sparkle to clean-toned arpeggios? Animate strummed passages? Widen and fatten distorted power chords? This box will do it all, cleanly and quietly. Set the Rate and Width controls to your liking and then dial in as much effect as you want with the Intensity knob. You can then shape the tone even further by EQ-ing the modulated frequencies with the bass and treble controls. Run in mono or use the stereo outputs for a huge, vibrant sound. If you're looking to preserve the low end of your guitar tone, the MXR Stereo Chorus has got you covered with its Bass Filter button that applies the effect to the high frequencies only.
click here for more information... |
|
 |
MXR M-135 Smart Gate Pedal
MXR
The MXR M-135 Smart Gate Pedal gives you 3 selectable types of noise reduction: Hiss, Mid, and Full. Bites down on hiss and hum but lets all of your music shine through. Intelligent design provides dual high and low adaptive filters, opens at lightning speed, introduces no extra distortion, and lets you control the sensitivity of the gate's threshold. The MXR M-135 Smart Gate Pedal features hardwire bypass with footswitch and slim, tough stompbox housing.
click here for more information... |
|
 |
MXR M-151 Doubleshot Distortion Pedal
MXR
With 2 distinct channels, huge output, and quiet operation, the MXR M-151 Doubleshot Distortion Pedal redefines what a distortion box should be. Bluesy grind, thick old-school leads, bottom-heavy modern metal, or radical future fuzz all are easily achieved with the M-151, and its 2 channels let you set up your favorites for instant selection. Independent gain and EQ controls give you complete control over both sides. Includes power supply.
click here for more information... |
|
 |
MXR M-181 Bass Blowtorch Overdrive Distortion Pedal
MXR
The M-181 MXR Bass Blowtorch bass overdrive pedal is made to deliver the hottest sounds this side of Hades-from a tube-like growl to full-blown distorted madness. Because the Bass Blowtorch's overdrive is focused in the midrange frequencies, you'll retain your low-end thunder and high-end sizzle while the overdriven mids cut through any mix. An active 3-band EQ with a mid shift switch provides precise signal balancing, while the Blend knob lets you balance the distortion with the direct signal for the exact tone you're after. 18-volt performance equals increased dynamic headroom, clarity, and low noise no matter the volume level, and true bypass circuitry means it's really off when you want it off, leaving your signal completely unaffected.
click here for more information... |
|
 |
MXR M-188 Bass Auto Q Auto Wah Pedal
MXR
For adding character to your bass tones, check out the MXR Bass Auto Q. It'll instantly funkify your riffs with authentic Crybaby wah and add a lush shimmer to sustained notes and chords. Turn the simplest rhythm and lead lines into complex textural effects, and take your music into uncharted territory. 5 knobs give you infinite control of the Bass Auto Q: Range controls the frequency floor of the effect; Q modulates the intensity of the wah by adjusting the bandwidth of the filter from a broad, subtle curve to a bright, sharp peak; Blend controls the mix between the wah and shimmer effects; Decay controls the transition between wah and shimmer; Rate controls the speed of the shimmer, from tremble to shriek; and Volume controls the overall effect volume. A rugged footswitch lets you bypass or engage the effect, and graphics glow in the dark to make this pedal easy-to-read on an dark stage. Housed in a virtually indestructible zinc box and powered by a single 9V battery or optional Dunlop ECB-003 AC adapter.
click here for more information... |
|
 |
MXR M-80 Bass Direct Box with Distortion
MXR
The MXR M-80 Bass Direct Box with Distortion is more than just a direct box. It's got so many features, you may wonder how you ever did without it! It includes a distortion channel with gain, volume, and blend controls; a noise gate to help keep it clean; a Color control; and 3-band EQ control that lets you dial in any tone you need. It also provides phantom power, and sports a parallel output jack for flexibility in routing. Whether you like it sweet and clean or hot and nasty, this DI does it all!
click here for more information... |
|
 |
MXR M235 Smart Gate Pro
MXR
The brilliant MXR M235 Smart Gate Pro rack piece is the big brother to the Smart Gate pedal. The Smart Gate Pro features the same great noise reduction as the pedal, with three selectable ranges (Hiss, Mid and Full) and a precise threshold trigger.
click here for more information... |
|
 |
MXR ZW-44 Wylde Overdrive Pedal
MXR
The MXR ZW-44 Wylde Overdrive Pedal performs like Zakk. Whether on his groundbreaking work with Ozzy Osbourne or with his own Black Label Society, Zakk Wylde's guitar playing is loud, tough, and relentless. Zakk's take-no-prisoners attitude extends to his quest for tone, too. His signature ZW-44 overdrive pedal will turn your clean amp into a heavy, chunky, crunch machine. Or, use it like Zakk does and kick it in front of a dirty amp for a screaming, sustaining lead tone. 3 simple controls output, tone, and drive make getting up and running easy, so you can concentrate on your chops.
click here for more information... |
|
 |
My-Light Utility Light Black with Chrome
My-Light
LED light clamps onto any surface up to 1-1/4". Swivel mount lets you aim it where you need it. Ideal for use on music stands. Waterproof. Includes 2 - 3V lithium batteries and one-year warranty. (Includes rack light only.)
click here for more information... |
|
 |
Nady 1001 MK2 Hand-Held Wireless Microphone System Channel A
Nady
5 selected frequencies are available on the VHF high band (171-216MHz)of the Nady 1001 MK2 Hand-Held Wireless Microphone System providing interference-free long-range performance. The receiver uses a half rackspace and features a retractable front-panel antenna, RF and AF 5-LED displays for monitoring incoming signal strength and audio level, balanced XLR and unbalanced adjustable 1/4" outputs, and a unique snap-out side-panel locking tab for optional side-by-side mounting. Mic range: 250-500' line-of-sight. The Nady 1001 MKII includes receiver and dynamic cardioid transmitter microphone. Please specify channel.
click here for more information... |
|
|
Nady 1001 MK2 Hand-Held Wireless Microphone System Channel B
Nady
5 selected frequencies are available on the VHF high band (171-216MHz)of the Nady 1001 MK2 Hand-Held Wireless Microphone System providing interference-free long-range performance. The receiver uses a half rackspace and features a retractable front-panel antenna, RF and AF 5-LED displays for monitoring incoming signal strength and audio level, balanced XLR and unbalanced adjustable 1/4" outputs, and a unique snap-out side-panel locking tab for optional side-by-side mounting. Mic range: 250-500' line-of-sight. The Nady 1001 MKII includes receiver and dynamic cardioid transmitter microphone. Please specify channel.
click here for more information... |
|
|
Nady 1001 MK2 Hand-Held Wireless Microphone System Channel D
Nady
5 selected frequencies are available on the VHF high band (171-216MHz)of the Nady 1001 MK2 Hand-Held Wireless Microphone System providing interference-free long-range performance. The receiver uses a half rackspace and features a retractable front-panel antenna, RF and AF 5-LED displays for monitoring incoming signal strength and audio level, balanced XLR and unbalanced adjustable 1/4" outputs, and a unique snap-out side-panel locking tab for optional side-by-side mounting. Mic range: 250-500' line-of-sight. The Nady 1001 MKII includes receiver and dynamic cardioid transmitter microphone. Please specify channel.
click here for more information... |
|
|
Nady 1001 MK2 Hand-Held Wireless Microphone System Channel E
Nady
5 selected frequencies are available on the VHF high band (171-216MHz)of the Nady 1001 MK2 Hand-Held Wireless Microphone System providing interference-free long-range performance. The receiver uses a half rackspace and features a retractable front-panel antenna, RF and AF 5-LED displays for monitoring incoming signal strength and audio level, balanced XLR and unbalanced adjustable 1/4" outputs, and a unique snap-out side-panel locking tab for optional side-by-side mounting. Mic range: 250-500' line-of-sight. The Nady 1001 MKII includes receiver and dynamic cardioid transmitter microphone. Please specify channel.
click here for more information... |
|
|
Nady 1001 MK2 Hand-Held Wireless Microphone System Channel F
Nady
5 selected frequencies are available on the VHF high band (171-216MHz)of the Nady 1001 MK2 Hand-Held Wireless Microphone System providing interference-free long-range performance. The receiver uses a half rackspace and features a retractable front-panel antenna, RF and AF 5-LED displays for monitoring incoming signal strength and audio level, balanced XLR and unbalanced adjustable 1/4" outputs, and a unique snap-out side-panel locking tab for optional side-by-side mounting. Mic range: 250-500' line-of-sight. The Nady 1001 MKII includes receiver and dynamic cardioid transmitter microphone. Please specify channel.
click here for more information... |
|
 |
Nady 1001 MK2 Wireless Instrument System Channel A
Nady
The Nady 1001 MK2 Instrument System offers 5 selected frequencies available on the VHF high band (171-216MHz) to provide interference-free long-range performance. The receiver uses a half rackspace and features a retractable front-panel antenna, RF and AF 5-LED displays for monitoring incoming signal strength and audio level, balanced XLR and unbalanced adjustable 1/4" outputs, and a unique snap-out side-panel locking tab for optional side-by-side mounting. WGT-15 transmitter operates over 15 hours on average, using a 9V alkaline battery. Features a top-panel input level adjust and locking mini-jack for secure attachment of the instrument cable. Range: 250' up to 500' line-of-sight.
click here for more information... |
|
|
Nady 1001 MK2 Wireless Instrument System Channel B
Nady
The Nady 1001 MK2 Instrument System offers 5 selected frequencies available on the VHF high band (171-216MHz) to provide interference-free long-range performance. The receiver uses a half rackspace and features a retractable front-panel antenna, RF and AF 5-LED displays for monitoring incoming signal strength and audio level, balanced XLR and unbalanced adjustable 1/4" outputs, and a unique snap-out side-panel locking tab for optional side-by-side mounting. WGT-15 transmitter operates over 15 hours on average, using a 9V alkaline battery. Features a top-panel input level adjust and locking mini-jack for secure attachment of the instrument cable. Range: 250' up to 500' line-of-sight.
click here for more information... |
|
|
Nady 1001 MK2 Wireless Instrument System Channel D
Nady
The Nady 1001 MK2 Instrument System offers 5 selected frequencies available on the VHF high band (171-216MHz) to provide interference-free long-range performance. The receiver uses a half rackspace and features a retractable front-panel antenna, RF and AF 5-LED displays for monitoring incoming signal strength and audio level, balanced XLR and unbalanced adjustable 1/4" outputs, and a unique snap-out side-panel locking tab for optional side-by-side mounting. WGT-15 transmitter operates over 15 hours on average, using a 9V alkaline battery. Features a top-panel input level adjust and locking mini-jack for secure attachment of the instrument cable. Range: 250' up to 500' line-of-sight.
click here for more information... |
|
|
Nady 1001 MK2 Wireless Instrument System Channel E
Nady
The Nady 1001 MK2 Instrument System offers 5 selected frequencies available on the VHF high band (171-216MHz) to provide interference-free long-range performance. The receiver uses a half rackspace and features a retractable front-panel antenna, RF and AF 5-LED displays for monitoring incoming signal strength and audio level, balanced XLR and unbalanced adjustable 1/4" outputs, and a unique snap-out side-panel locking tab for optional side-by-side mounting. WGT-15 transmitter operates over 15 hours on average, using a 9V alkaline battery. Features a top-panel input level adjust and locking mini-jack for secure attachment of the instrument cable. Range: 250' up to 500' line-of-sight.
click here for more information... |
|
|
Nady 1001 MK2 Wireless Instrument System Channel F
Nady
The Nady 1001 MK2 Instrument System offers 5 selected frequencies available on the VHF high band (171-216MHz) to provide interference-free long-range performance. The receiver uses a half rackspace and features a retractable front-panel antenna, RF and AF 5-LED displays for monitoring incoming signal strength and audio level, balanced XLR and unbalanced adjustable 1/4" outputs, and a unique snap-out side-panel locking tab for optional side-by-side mounting. WGT-15 transmitter operates over 15 hours on average, using a 9V alkaline battery. Features a top-panel input level adjust and locking mini-jack for secure attachment of the instrument cable. Range: 250' up to 500' line-of-sight.
click here for more information... |
|
 |
Nady 1002 MK2 Hand-Held VHF Wireless Microphone System Channel A
Nady
The Nady 1002 MK2 Hand-Held Wireless Microphone System is loaded with solid operating features including balanced XLR and unbalanced adjustable 1/4" jack outputs. The 5-LED display monitors incoming signal strength and audio level. Half-rack receiver design has retractable front-panel antennas. Nady's proprietary DigiTRU Diversity circuitry eliminates dropouts and maximize operating range. Noiseless transmitter on/off switching. The MK2 wireless system includes the WHT-15 hand-held mic transmitter.
click here for more information... |
|
|
Nady 1002 MK2 Hand-Held VHF Wireless Microphone System Channel B
Nady
The Nady 1002 MK2 Hand-Held Wireless Microphone System is loaded with solid operating features including balanced XLR and unbalanced adjustable 1/4" jack outputs. The 5-LED display monitors incoming signal strength and audio level. Half-rack receiver design has retractable front-panel antennas. Nady's proprietary DigiTRU Diversity circuitry eliminates dropouts and maximize operating range. Noiseless transmitter on/off switching. The MK2 wireless system includes the WHT-15 hand-held mic transmitter.
click here for more information... |
|
|
Nady 1002 MK2 Hand-Held VHF Wireless Microphone System Channel D
Nady
The Nady 1002 MK2 Hand-Held Wireless Microphone System is loaded with solid operating features including balanced XLR and unbalanced adjustable 1/4" jack outputs. The 5-LED display monitors incoming signal strength and audio level. Half-rack receiver design has retractable front-panel antennas. Nady's proprietary DigiTRU Diversity circuitry eliminates dropouts and maximize operating range. Noiseless transmitter on/off switching. The MK2 wireless system includes the WHT-15 hand-held mic transmitter.
click here for more information... |
|
|
Nady 1002 MK2 Hand-Held VHF Wireless Microphone System Channel E
Nady
The Nady 1002 MK2 Hand-Held Wireless Microphone System is loaded with solid operating features including balanced XLR and unbalanced adjustable 1/4" jack outputs. The 5-LED display monitors incoming signal strength and audio level. Half-rack receiver design has retractable front-panel antennas. Nady's proprietary DigiTRU Diversity circuitry eliminates dropouts and maximize operating range. Noiseless transmitter on/off switching. The MK2 wireless system includes the WHT-15 hand-held mic transmitter.
click here for more information... |
|
